白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

新型同径分层止水工艺在地热探采深井的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2021,48(8):33-39

原平大营地热探采结合深井完钻井深3088 m,为探明494~3088 m变质岩地层的水文地质参数和水源补给情况,基于岩心和测井资料划分4个抽水试验段,且试验后需要恢复目的含水层。根据“一孔同径分层止水”原则,设计了管内止水托盘止水、管外止水伞止水的新型同径分层止水工艺。该工艺简化了井身结构,避免了管外投粘土球、注水泥等堵塞含水层的情况。现场实施表明,该工艺止水效果完全满足水文地质抽水试验要求,可为同类工程提供经验和借鉴。  相似文献   

Kelvin-Voigt黏弹性介质井孔声场有限差分数值模拟与波形特征     

岳崇旺  王祝文 《吉林大学学报(地球科学版)》2021,51(4):1268-1275

岩石介质具有黏滞性,黏弹性介质模型相对于弹性介质模型更为接近岩石介质的真实情况。根据Kelvin-Voigt黏弹性单元体模型本构关系,推导了柱坐标系下各向同性黏弹性介质时间域交错网格有限差分方程,进行了黏弹性介质井孔声场的数值模拟。模拟结果表明：品质因子和声源中心频率对黏弹性介质中的井内外声场均有影响：井外声场和井内声场的衰减均随品质因子的增大而减小,井外声波和井内反射波振幅随之增大;井外声场的衰减随声源中心频率的增大而减小,井外声波振幅随之增大,井内声场的衰减随声源中心频率的增大而增大,井内反射波振幅随之减小。  相似文献   

超大超深灌注桩施工关键技术研究与应用     

刘金森  高慧广  朱神松  吴小勇 《中国煤炭地质》2021,(3):25-27

以深圳某项目桩基础施工为依托,综合考虑地质特点和施工工艺要求,对超大超深灌注桩在花岗岩地层施工开展了相关研究,并将研究成果应用到实际施工中,有效地解决了该类型桩基础施工中的难点,保证了项目的顺利实施,为后续类似项目提供了参考依据。  相似文献   

From foredeep to orogenic wedge-top: The Cretaceous Songliao retroforeland basin,China     

《地学前缘(英文版)》2023,14(3):101527

Songliao Basin, the largest Mesozoic intracontinental nonmarine basin in eastern China, initiated during the latest Jurassic as a backarc extensional basin; rifting failed and thermal cooling controlled subsidence through the early Late Cretaceous. Integrating 2-D and 3D reflection seismic and borehole data with regional geological studies, we interpret sedimentary sequence and structural patterns of the Coniacian-Maastrichtian fill of Songliao Basin as defining a retroforeland basin system developed after 88 Ma (marked by the T11 unconformity in the basin), including (1) significant increase in the thickness of the Nenjiang Formation eastward towards orogenic highlands of the Zhangguangcai Range and the convergent continental margin; (2) a shift of detrital provenance in the basin from north to southeast; and (3) propagation of E-W shortened structures, increasing eastward in amplitude, frequency, and degree of inversion toward the orogen. During latest Cretaceous, foreland basin fill progressively deformed, as the foredeep evolved to a wedge-top tectonic setting, marked by the basin-wide T04 unconformity within the upper Nenjiang Formation at 81.6 Ma. Much of the basin was brought into the orogenic wedge and eroded by the end of the Cretaceous. Late Jurassic/Early Cretaceous backarc rifting of uncratonized basement comprised of accreted terranes likely facilitated and localized the foreland. Synrift normal faults reactivated and extensively inverted as thrust faults are prominent in the eastern 1/3 of the basin, whereas folds developed above detachments in shaley early post-rift strata dominate the western 2/3 of the basin. Songliao foreland development likely was driven by changing plate dynamics and collision along the Pacific margin after 88 Ma.  相似文献   

Torsional dynamic response of a large‐diameter pipe pile in viscoelastic saturated soil     

Changjie Zheng  Hanlong Liu  Xuanming Ding  Yaru Lv 《国际地质力学数值与分析法杂志》2014,38(16):1724-1743

An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

基于最大球算法定量表征土体空间孔隙网络     

解朝阳  张巍  姚东方  王坚  朱雨辰 《工程地质学报》2020,28(1):60-68

孔隙网络控制着土体渗流、排水固结与基质吸力等重要工程性质。本文介绍了多孔介质孔隙网络最大球建模基本原理与算法。以显微CT扫描振捣干法生成的南京粉砂试样为例,采用最大球算法建立了试样三维重构模型表征单元体(REV)的空间孔隙网络球棍模型,计算得到了样品REV尺度的孔隙网络参数,统计发现,孔隙半径、喉道半径、孔隙配位数、孔隙截面形状因子、喉道截面形状因子与喉道长度等孔隙参数均近似服从正态分布,孔隙体积近似服从衰减型指数分布。孔隙与喉道半径分别分布在100μm与65μm以内,两者数学期望分别为40. 0μm与18. 0μm;配位数分布在25以内,数学期望为5. 1;孔隙与喉道截面形状因子分别分布在0. 01~0. 04与0. 01~0. 05的区间内,两者数学期望分别为0. 019与0. 033;喉道长度分布在100~800μm以内,数学期望为292. 22μm。同时发现,样品中体积小于1. 5×10^7μm^3的小孔隙数量超过90%。本方法可应用于土体细观孔隙结构的定量表征。  相似文献   

鄂尔多斯盆地南缘黄陵地区煤铀兼探钻孔数据集成与三维地质模型构建          下载免费PDF全文

张云  张天福  孙立新  程银行  张祺  王少轶  程先钰  周小希 《中国地质》2020,47(S1):231-240

鄂尔多斯盆地南缘黄陵地区铀成矿前景良好。中国地质调查局在该地区组织实施了含铀岩系三维地质调查工作，以寻找可地浸砂岩型铀矿找矿靶区为目标，采用“煤铀兼探”、“油铀兼探”的新思路，对煤田钻孔资料进行“二次开发利用”，开展勘查选区研究，完成了354口煤田钻孔（其中筛选出潜在砂岩型铀矿（化）孔49口）和21口铀矿验证钻孔（其中工业矿（化）孔16口）的数据采集建库，在此基础上建立了专题成果图集及三维地质模型。该数据库主要由含铀岩系地层厚度等值线图、砂体厚度等值线图、顶底板埋深等值线图、含砂率等值线图、放射性异常等值线图等专题成果图集和三维地质结构模型组成，为铀矿勘探开发提供了有利支撑和服务作用。  相似文献   

Inference of in situ stress from thermoporoelastic borehole breakouts based on artificial neural network     

Hua Zhang  Shunde Yin 《国际地质力学数值与分析法杂志》2019,43(16):2493-2511

The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress.  相似文献   

苏77-5-8H井大斜度穿煤层安全钻井技术          下载免费PDF全文

柯学  李继营  池崇荣  刘志良 《探矿工程》2011,38(12):13-17

苏77-5-8H井为苏里格气田苏77区块第一口利用水平井提高山23组开发效益的大斜度穿煤层水平井,目的层山23储集砂岩上部发育厚度25～30 m的碳质泥岩和煤层段,由于煤系地层的特殊性,钻进过程中易坍塌,且煤系地层正好处于入靶前的造斜井段,钻井施工难度大、风险高。在分析了煤层井壁稳定机理基础上,针对苏77区块地层特性和水平井钻井施工的难点,分析了该井主要技术难点,重点从井眼轨迹轨道设计优化、轨迹控制及施工技术措施和钻井液技术等方面对该井安全技术进行了全面的介绍,为今后同类井钻井提供可参考的经验。  相似文献